BP 10A ESC for Brushless Motors

Features:

• Low resistance
• High rate PWM
• User programmable brake
• Low voltage auto setting based on battery
• Throttle range self-adjusting
• Soft start ramp up
• Auto motor cutoff with reset
• Safe power arming program ensures motor will not run accidentally after turn on
• Low torque start
• Auto shut down when signal is lost

Specifications:

• Weight: 7.1 g (0.25 oz) with wire
• Size: 22 x18 x5 mm (0.9 x 0.7 x 0.2 in)
• Constant Current: 10A
• Max Current: 13A (for ten seconds)
• FET: 6
• BEC: Yes, 1.5A
• TIMING: Auto
• PWM: 8 KHz
• Input: 2 to 3 Li-Po, or 4 to12 Ni-MH/Ni-Cd
• Low-Voltage Cutoff: Auto detection and set

Notes:

1. The maximal length of power cable between power pack and ESC is 20 cm.
2. It is recommended to solder the output cables from the ESC directly to themotor.
3. Plug the universal connector to the receiver throttle channel.