Castle Creations Phoenix-110 High Voltage ESC Brushless

This is the Castle Creations Phoenix HV-110 High Voltage, Brushless, Sensorless Electronic Speed Control.

Features:

• Handles up to 36 NiMH/NiCd, cells or 12s LiPo (50V) maximum, 16 cells NiMH/NiCd or 3S LiPo minimum
• Up to 110A continuous current
• Forward and reverse
• Auto Shut Down when signal is lost or radio interference occurs
• Smooth reverse exponential throttle
• Audible Arming Signal
• Self-calibrating endpoints: maximizes usable stick travel
• Over temp motor cut-off with reset

User programmable options include:

• Low-voltage cutoff with Auto-LiPo detect as default
• Over-Current Protection
• Brake Type
• Throttle Range
• Timing Advance
• Cutoff Type
• Soft Start ramp up prevents damage to gearboxes
• Switching Frequency

Includes: One Phoenix HV-110 Electronic Speed Control with 10AWG motor and battery leads, Universal receiver connector and set up manual

Requires:

• Receiver battery pack, Dual Opto-Coupled (no BEC)
• Motor and battery connectors of modeler's choice

Specifications:

• BEC: None (dual opto-coupled)
• Maximum Cells: 36 NiMH/NiCd, or 12s LiPo (50V)
• Continuous Current: 110A
• Minimum Cells: 12 NiMH/NiCd, or 4s LiPo
• Switching Rate Programmable: 13, 26, or 52kHz
• Resistance: 0.001 Ohms
• Brake: Programmable
• Reversible: Yes, change any two wires
• Low Voltage Cut-Off: Programmable
• Size: 1.55" x 2.8" x 1.25" (39mm x 71mm x 32mm)
• Weight (with wires): 5.3 oz. (150g)
• Receiver Connector: Universal