E-flite Park 300 Outrunner 1380 Brushless Motor

This motor is ideal for 3D models 6-9 oz (170-255g) and sport and scale models 8-12 oz (225-340g) You'll need 8A to 10A brushless ESC, 6-8 NiCd/Ni-MH or 2-3S Li-Poly batteries. Use prop size 6x5 to 8x8.38 for 3-cell or up to 10x3.8 for 2-cell.

Specifications:

• Size: 180 / 280 replacement
• Bearings: Ball bearings
• Wire Gauge: 1.5mm
• Voltage: 7.2 - 11.1V
• RPM/Volt(Kv): 1380
• Resistance (Ri): 0.328 ohms
• Idle Current (lo): 0.38A at 8V
• Continuous Current: 7A
• Max Burst Current: 9A for 15 sec
• Weight: 24g (0.8 oz)
• Overall Diameter: 28mm (1.1 in)
• Shaft Diameter: 3.2mm (1/8 in)
• Overall Length: 22mm (0.87 in)