Go back to: Products > Radios
View Cart

Futaba 7CAF FM Radio Systems (FUTJ69xx)

$239.99

Futaba 7CAF 7-Channel 72 MHz Tx with FP-R127DF FM Rx and 4 S3004 Servos

This is the Futaba 7CAF 7-Channel Computer Aircraft Radio with the R127DF FM Receiver and four S3004 Ball Bearing Servos.

Features:

10-model memory and 6-character model naming

Same Dial n' Key programming found on Futaba's 9C systems

Basic menu for everyday sport flying, Advanced menu for more complicated routines

Heli and airplane control layouts in FM or PCM

Airplane Specific Features:

  • Flaperon
  • Flap Trim
  • Air Brake
  • levator to Flap
  • Flap to Elevator
  • V-Tail Mixing
  • Elevon Mixing
  • Aileron to Rudder
  • Snap
  • Mode Select feature
  • Adjustable throttle cut
  • Throttle curve normal (5 points)
  • Pitch curve normal (5 points)
  • Three programmable mixes
  • VR switch controls proportional 7th channel
  • EEPROM memory feature retains settings even when transmitter battery is disconnected or removed

Mode Select Feature: Dual Rates on 4 Channels, Triple rates available if using the 3 position switch, and Full function trainer system, trainer cord not included use FUTM4415 or FUTM4420

One year limited warranty

Includes:

  • One Futaba 7CAF 7-Channel Aircraft Radio
  • Four S3004 Ball Bearing Servos, FUTM0004
  • R127DF FM receiver, FUTL0702, FUTL0703
  • 600mAh NT8S600B TX battery, FUTM1457
  • 600mAh NR-4J RX battery, FUTM1280
  • FBC-19B (4) Wall charger, FUTM1830
  • Servo accessory bag, frequency flag set, neck strap, on/off switch, and instruction manual

Requires: Charging batteries overnight before use

Specifications:

Transmitter:

  • Transmitting Frequency: 72 MHz band
  • Modulation: FM/PPM or PCM switchable
  • Power Supply: 9.6V NT8S600B NiCd battery
  • Current Drain: 250 mA

FP-R127DF FM Dual Conversion Receiver:

  • Receiving Frequency: 72 MHz band
  • Intermediate Frequency: 10.7 MHz & 455 kHz
  • Power Requirement: 4.8 - 6V NiCd battery
  • Current Drain: 10 mA
  • Size: 2.53" x 1.41" x 0.83" (64.3mm x 35.8mm x 21mm)
  • Weight: 1.42 oz (40.3g)

S3004 Standard Size Ball Bearing Servo:

Control System: Pulse width control, 1.52 ms neutral

Power Requirement: 4.8V-6V

Output Torque: 44 .4oz/in (3.2kg-cm) at 4.8V

Operating Speed: 0.23 sec/60 at 4.8V

Size 1.59" x 0.79" x 1.41" (40.4mm x 19.8mm x 36mm)

Weight: 1.31 oz (37.2g)

Comments: Although this is the 7CAF system, the transmitter has a T7CAP sticker on it meaning it is PCM or FM/PPM compatible.