|
Futaba 72MHz 9CHF Super FM Computer Radio with the R148DF 8 Channel Receiver and no Servos. Features: - Enhancements to all three modes over the original 9C series include; Glider Mode: In addition to the Basic offset trim, three new offsets are offered (launch, thermal and speed) with camber that can be customized for each, Four camber mixes can be set up on one screen and programmed to any of the variable dials. Airplane Mode: With either selectable switch using channels 5, 7 or 8 fliers can set up a two rate or a three rate GYA gyro system, Air brake is now switch-selectable. Helicopter Mode: Throttle Curve and Pitch Curve now feature a delay for smoother transition from hover to idle-up and better control, Throttle Hold and Idle-Up can be assigned to any switch that feels more comfortable to the pilot
- 18 model memory total with included CAMpac module
- All functions are assignable
- 3 function timer-up/down or to keep track of total flying time-and can be programmed to any of the switches, the POWER switch or the throttle stick
- Full functionality trainer system, requires trainer cord (not included)
- One year manufacturer limited warranty)
Airplane Programmable Features: 7 usable programmable mixes plus - Aileron differential
- Airbrake (w/delayed elevator)
- Flaperon and flap trim
- Elevator flap mix
- V-tail and elevon
- 4 Programmable snap rolls
- Throttle-Needle mixing
- Twin elevators options
- 2nd channel aileron select
Heli Programmable Features: 3 usable programmable mixes plus - Governor mixing, 5 point throttle, pitch and revolution curves
- Hover-throttle mix and hover-pitch mix
- Trim delay
- 3 idle-up conditions
- Throttle-Needle mixing
- Gyro mixing
- Offset mixing
Sailplane Programmable Features: 7 usable programmable mixes plus - Single/Dual flap servos
- Flap aileron/aileron flap
- Elevator flap
- Aileron differential
- Butterfly mixing
- Start (launch) preset
- Speed preset
Includes:One 9CHFS transmitter with frequency flag set and manual, R148DF receiver, 700mAh transmitter battery, 1000mAh receiver battery, one 16K Campac module, battery charger, neck strap, On/Off switch, 9" (229mm) servo extension Requires:Servo depending on application Specifications: Transmitter: - Operating System: 2-stick, 9-channel, PCM1024 system
- Modulation: FM/PPM or PCM, switchable
- Power Supply: 9.6V NT8S700B NiCd battery
- Current Drain: 280 mA
FP-R148DF Receiver: - Narrow Band: 20kHz
- Intermediate Frequency: 1st IF: 10.7MHz, 2nd IF: 455kHz
- Power Requirement: 4.8 - 6V (shared with servos)
- Current Drain: 14 mA
- Size: 2.19 x 1 x 0.89 in (65mm x 36mm x 21.5mm)
- Weight: 1.07 oz (30.4g)
FBC-19B(4) Wall Charger: - Input: 120V AC 60Hz 7W
- Output: Tx 9.6VDC 70mA, Rx 4.8VDC 100mA)
Comments: - The 9C Super differs from the standard 9C in that the Super's glider mode offers three offsets that can be customized, launch, thermal and speed with camber. The four camber mixes can be set up on one screen and programmed to any of the variable dials.
- The Airplane mode offers a selectable switch using channels 5, 7 and 8. All can be set up as 2-rate (up or down) or a 3-rate (up/center/down) and a gyro gain menu.
- The airbrake is now switch selectable.
- The Heli mode throttle and pitch curve offer a delay for smoother transition from hover to idel-up. The throttle hold and idle-up can be assigned to any switch
- 12 model memory
|