| Mini IFO Design Features: Carbon rod propeller guard
Simple mono wheel landing gear
Extremely simple hinges
All carbon airframe for durability
Collapsible to fit in standard large suitcase Specifications: 25.5" wing span
Wing area 320 sq.in
Weight 4.0 oz (with a 10 cell 50mah NiCad)
Wing Loading 1.8 oz/sq.ft. Step by Step Instruction
Full size Plans
Carbon Rods
60 ft Kevlar Thread Spool
Wheel Now Included! Super Tough Ripstop Polyester | Mini IFO Performance: 2-3 ft. diameter Outside & Inside Loops
(also try a square loop, it's really lots of fun!)
540 deg. per second Rolls
Hovering with 10 cell pack
Sustained Inverted Flight
20 to 0 mph speed range
5 ft. take off roll into half inside loop
Picnic table top landing
Aerobatics performance is only limited by your imagination! Required to Complete: - GWS IPS-DX2BB AXCS motor / gearbox
- GWS EP1047 propeller
- GWS ICS-100 speed controller
- Two micro servos with at least 7 oz.-in of torque
- Light weight receiver: GWS Pico or similar
- NiMH 7 or 8 cell 370mAh battery pack
- NiMH Charger
- Transmitter requires elevon mixing
- Hot Stuff or Zap & 3M77 spray adhesive
|
RC Mart Heading
Lock Gyro
