This is the Royal Evo 9 Channel Digial MultiPlex Synthesized Transmitter and works for Fixed Wing Aircraft and Helicopters.

Features:

• Ergonomically optimized case design, with precision stick units which swivel to user's ideal angle, suitable for hand-held use or in tray
• Graphical folding screen (132x64 pixels) with variable contrast
• Modern synthesizer RF (transmitter) module with software channel selection

System Features:

• 9 channels
• 20 model memories
• 6 menu buttons for fast, direct access to main menus
• 5 function buttons, two 3-D digital adjusters for user friendly programming
• Detailed menu texts, selectable languages which vary
• Comprehensive set-up and mixer facilties for fixed wing, heli
• Sample model (templates) minimize programming effort required
• Unrestricted assignments of transmitter controls, switches, and servos
• 4 flight phases per model memory
• 5 timers (3 alarm timers + transmitter and model times)
• Facilites for selective teacher/pupil training operations
• 8 model templates: Basic, ACRO, HOTLINER, DELTA, GLIDER, 4-FLAPS, HELImech, HELIccpm
• One 6 cell, 1500mAh NiMH battery pack
• One AC 60mA Tx, Rx wall charger,
• Comes with additional black plastic toggle grips, 6-prong grips,
• 2 ergonomic grips, the grips have a switch and button to control switches
• Decal sheet
• Illustrated instruction manual

Requires: Servos, receiver and receiver battery

The Royal Evo 9 Channel can handle all types of servos and receivers. The radio can determine negative, positive shifts for different equipment.

Specifications:

Transmitter:

• Dimensions: 8.7" x 7.9" x 2.4" (220mm x 200mm x 60mm)
• Weight: 26.4oz (750g) excludes transmitter battery, 31.7oz (900g) including battery
• Channel Spacing: 10kHz
• Power Supply: 7.2V 6 cells, AA size NiMH battery
• Current Drain: 20mA excl. RF module, 165mA with HFM-4, 190mA with HFM-S
• Battery Charger: Input: 120V-60Hz 10W, Output: For Tx battery, 7.2V @60mA, for Rx battery 4.8V @ 60mA

Warranty: Royal MultiPlex are guaranteed in accordance with current statutory requirements, MultiPlex is in no position to influence the way you install, operate, and maintain radio control system components. For this reason MultiPlex is obliged to deny all liability for loss, damage or costs which are incurred due to the incorrect use and operation of their products.

Options:

MULTIPLEX Channel Check power-on guard system does two things: Scans all frequencies/channels in the band, if channel is occupied synthesizer won't start and will display a warning, if not occupied channel will operate (unit not carried at this time).