Thunder Power TP-1010C 1 to 10 Cell Li-Po DC Charger

Features:

• Hi-efficiency digital power system
• Specially design for safe Li-polymer charge algorithm
• Backlit LCD
• Balance charge capability (Thunder Power Balancer TP-210V required)
• Individual cell over charge protection capability
• Data port for communicates to balancer
• Automatic FAN control
• 10 programmable Memory charge parameter settings
• Programmable charge settings (Fast Charge /Full charge/storage charge and Li-on battery)
• Selectable discharge cut-off voltage
• Fast charge algorithm

Specifications:

• Input Power Capacity: 11V-15V DC 25Amp at maximum charge rating
• Charge Battery Type: Lion or Li-polymer
• Charge Voltage: up to 10 cell / 42V
• Charge Current: 0.25A to 10Amp
• Charge Type: CC and CV
• Charge Termination: 5 types selectable
• Over Charge Cuttoff Voltage: 4.235V
• Auto-Balance Charge Current: 300mA or adjustable up to 1C
• Imbalance Cut-Off: 0.2V
• Auto-Imbalance-Current Control Active Voltage: 0.12V at CC and 0.06V at CC charge phase
• Auto-Current Control Reset Imbalance Voltage: 0.03V
• Discharge Voltage: up to 10Cell / 42V
• Discharge Power Capability: up to 22 Watt
• Capacity Display: 0--99999mAh
• Timer Display: 0--10 hour
• Display Tolerance: +/- 0.25%
• Display Type: Backlit 2 x 16 dot LCD
• Charge Power Capability: up to 210 Watt

Cautions:

• Do not charge in a vehicle.
• Use Auto-vehicle 12VDC battery or good quality power supply.
• Do not charge in direct sun light.
• Do not charge when ambient temperature is extremely high.
• Use and store the charer in a dry environment.
• Charge in an isolated area away from flammables.
• Do not attempt to charge when Li-poly battery pack is hot.
• Do not charge unattended.

Important Note (Data Link Cable):

The data cable (#DL-250) included is internally optical coupled to isolate connection between charger to balancer. Do not make a direct connection by using any other cables. It may make a common ground and harmful hazards.