|
Berg-6*G III Receiver with TSR, FS, and DSP
 The
Berg-6*G III is the best in the state of the art performance to be found in
a R/C receiver available today. Its small, lightweight size is due to the
surface mount technology used throughout. The Transmitter Signal Recognition
(TSR) of the receiver learns the characteristics, or the signature of the
transmitter, and this makes it compatible with all brands of FM
transmitters. The Berg-6*G III receiver has features found in no other
receiver on the market today such as Fail Safe (FS) or Signal Hold,
Auto-detection modulation polarity shift, and programmable channel 5 or
channel 6. Advanced Ultra narrow-band circuitry design that deals directly
types of interface found in our R/C world lets you fly worry free and makes
the Berg-6*G III receiver one of the most stable receiver on the market
today.
This small, lightweight receiver is a full-range, no compromise, super
narrow band receiver using Digital Signal Processing (DSP) in the servo pulse
decoder for optimum performance in even the worst RF environments. By
itself, this receiver weighs only 10.0 grams. It is packaged in a strong,
lightweight, fuel-proof, case (3.5 grams).
To
save weight, some people take this receiver out of its case and protect it
with thin heat-shrink material. To facilitate this, we have designed a
special antenna restraint into this receiver. This does not mean that you
can "pull all you want" on the antenna, but it is a vast improvement over
what we have thus far seen in the industry.
Note:
Futaba Radios with Frequency Synthesizers are not compatible with these
receivers. However, all Transmitters with Hitec Spectra Module are fine. The
default settings on Berg-6*G III are Fly-wheel Hold Mode ON, Fail-safe Mode
OFF, and Channel 5 output on output port 5. Transmitter and included two
jumpers are required for programming. |
RC Mart Heading
Lock Gyro
